Job sheet1 of 3
Lock Rekeying
- The call
- Your roommate moved out last weekend. Rent is settled, the room is empty, and the key is still on their ring.
- First step
- Reading the keyway on each lock
ServiceLock Rekeying
Locksmith in Welland, OntarioThe key
is in the details.
A door that latches on the first push, a deadbolt that throws fully, a key that slides in without a wiggle: these are small things that add up to a home that feels secure. We fuss over them so you do not have to.
Request a visit
Same fees day or night · Welland
Locksmith services
Pick the closest, or call (365) 364-0824
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…
How this company came to be
Rekeying is the quiet workhorse of what we do. It keeps the lock you already have and simply changes which key operates it, which makes it the sensible answer after a move, a lost set, a tenant change or a contractor who kept a copy. We can usually bring several doors onto one key at the same visit, and we show you the old pins before we leave.
Nearby Pelham, Crowland, Maple Park, Stop 19, Welland South, Fonthill, Kunda Park, Fenwick and Ridgeville
Shop rules
We look after the door, not just the lock.
- Your right to be there, confirmed. For lockouts and key cutting we check identification or another proof. It is a courtesy to you and to whoever else holds a key.
- Options for now and later. Sometimes the sensible move is a small fix now and a planned upgrade later. We tell you which parts are urgent and which can wait.
- A clean door and clear notes. We leave the area tidy and give you a short written account of what was done and how many keys were cut.
- Open 24/7, same fees any hour. Send a photo of the lock.
35 years in business · Call about rekeying your new home: (365) 364-0824
Home lockout service
The work we take on
Choosing a service is easier when you know what each one actually changes. Rekeying changes the key, replacement changes the hardware, repair keeps what you have working, and installation adds something new. The sections below sort our work along those lines.
Lockout Services
An after-hours lockout is different from a planned visit, so we treat it differently.
- Home Lockout ServiceThe moving truck has left, half the boxes are inside, and the single key the previous owner handed over turns the knob but not…
- Business Lockout ServiceYou signed the lease on the unit last week and the landlord handed over possession, but the previous tenant's locks are still on…
- Broken Key ExtractionThat key had been bending a little for years, and you kept straightening it.
- Break-In Damage Lock RepairPolice have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a…
- Seized & Jammed Lock OpeningThe shop's lever handle goes down as usual, but the latch inside the mortise case never pulls back.
- Lost Keys — Same-Visit RekeyA roommate moved out on bad terms and says the key was left on the counter.
Change or Rekey Locks
The right lock for a home is the one you will actually use every time.
- Lock RekeyingThe previous owners left a coffee tin of keys on the counter, some labelled, most not.
- Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
- Lock Replacement & UpgradeSomeone tried the back door while you were away.
- Vintage Mortise Lock ServiceThe interior bedroom doors on the second floor have the original mortise latches, and none of them close any more.
- Smart Lock InstallationThe deadbolt is a stiff double-cylinder model that needs a key from both sides, and in the dark hallway finding it is a nuisance.
- Gate & Building Entry LocksThe gate to the side yard used to close with a satisfying click.
- Mailbox Lock ReplacementThe little brass key for your curbside mailbox was on the same ring as the one you lost at the gym last week.
Small things.
Big difference.
The key you reach for. The door you come home to. Good locksmith work begins with understanding how you use them.
Job sheet2 of 3
Deadbolt Installation
- The call
- You moved in three weeks ago. The previous owner left a handful of keys, none labelled, and the bolt on the side door rattles in its housing.
- First step
- Where the bolt should sit on the door
ServiceDeadbolt Installation
Job sheet3 of 3
Home Lockout Service
- The call
- You reached the front step with the groceries, patted every pocket twice, and the house key is simply not there. It was on the ring this morning.
- First step
- Where the key went
ServiceHome Lockout Service
Fig.1
Locksmith
High Security Locks
Drawn forWelland
ScaleNot to scale
Every high security installation ends with a walk-through: how the new key feels, how the bolt seats, where the keys are numbered, who is on the authorisation list. You should leave knowing exactly what was fitted and how to manage it.
Layer 1The key
High Security Locks
After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.
Layer 2The cylinder
Lock Replacement & Upgrade
Someone tried the back door while you were away. The jamb is splintered around the strike, the bolt is bent, and the knob turns with a grinding feel.
Layer 3The bolt and strike
Deadbolt Installation
The front door has a handsome lever and a keyed knob, and that is all. Nothing above it.
Layer 4The door and frame
Break-In Damage Lock Repair
Police have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.
High Security Locks. After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws.
Request a visit
Commercial Locks
Panic hardware, door closers and exit devices are the parts of a commercial door that nobody notices until they fail. We service them, replace them and set them so the door closes fully and latches every time, which is what keeps the alarm and the lock meaningful.
Commercial LocksWhen
- Commercial RekeyingA key turned up in the parking lot with the shop's name on its fob.
- Master Key System DesignThe new wing was built with its own brand of cylinder, so the two-year-old keys from the original building do not open…
- Access Control Installationplanned with the businessYou just leased the empty unit next door and want the new tenant to open their own suite without a key to yours, to the…
- Panic & Exit HardwareA padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the…
- Commercial-Grade Lock Replacementany time of yearAn inspection report flagged the rear exit as needing hardware that opens with one motion and no key, and that door…
Safes
Safe Opening & Combination Change
A safe built to protect firearms is opened with the same care as any other, but the aftermath gets one extra look: once the door is open, the storage arrangement inside is checked against what the applicable federal rules for secure…
Which fix fits?
Tap a situation. The answer opens here.
If Your front door has only the lock in the knob, nothing else.
Then Add a proper deadbolt above it.
A bolt into a reinforced strike is what actually holds a door; the knob just keeps it closed. Deadbolt Installation
If The deadbolt wobbles and the screws spin in the door.
Then Re-fit the hardware and repair the bore.
Stripped holes can be plugged and redrilled, so the same lock sits tight again.
If You are tired of carrying keys and want a code instead.
Then A keypad deadbolt with a key override.
Each family member gets a code, guests get a temporary one, and a mechanical key remains for the day the batteries die. Deadbolt Installation
Five scenes · open 24/7
How a visit goes
Rekeying is the quiet workhorse of what we do. It keeps the lock you already have and simply changes which key operates it, which makes it the sensible answer after a move, a lost set, a tenant change or a contractor who kept a copy.
Step 1 of 5
Call and describe the door
Describe the property, the hardware and what has changed, and the visit starts from what you have seen.
Step 2 of 5
On our way
Outdoor locks live a harder life. We check the gate alignment, the exposure to rain and freezing, and how it is used before recommending hardware.
Step 3 of 5
Your right to be there, confirmed
For lockouts and key cutting we check identification or another proof. It is a courtesy to you and to whoever else holds a key.
Step 4 of 5
Options for now and later
Sometimes the sensible move is a small fix now and a planned upgrade later. We tell you which parts are urgent and which can wait.
Step 5 of 5
A clean door and clear notes
We leave the area tidy and give you a short written account of what was done and how many keys were cut.
Wellandinformation
NiagaraOntario
- Town
- Welland, Niagara
- In business
- 35 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (365) 364-0824
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 66 in 100 homes · older homes
- 65 in 100 homes · mostly houses
- About 66% of homes in Welland were built in 1980 or earlier, according to the 2021 Census.In neighbourhoods of established homes, keys have often been copied many times over many owners. Rekeying every exterior door to one fresh key is the common first job, and it works on old cylinders just as well as on new ones.
- Single-detached houses make up about 65% of homes in Welland (2021 Census).Detached homes are exposed to weather on every side, so exterior locks see rain, salt and freezing air directly. Choosing hardware with a good finish and a cylinder that tolerates cold, then lubricating it properly, keeps every door turning through winter.
Good questions about locks
Should we rekey every time an employee leaves?
Rekey when a key has not come back or when the departure was unfriendly; when a key is returned and the register confirms it, the cylinders it opened are as secure as before. Businesses that want a response to every departure without a visit each time fit interchangeable cores and swap them in-house. Whatever the trigger, dealing with only the cylinders that key opened keeps the response proportionate.
Can padlocks, cabinets and the mailbox go on the plan too?
Yes. Gate, cage and shutter padlocks that accept repinning can share the back-door key, and the locks on filing cabinets, drawers and display cases can be grouped so the people who work at them carry a single key while the manager holds a separate one. Mailbox cylinders are small and are usually swapped for new rather than repinned. Everything is entered on the chart, so one document covers the whole premises.
What is an interchangeable core and why is it suggested for staff turnover?
A small-format interchangeable core is a small figure-eight cylinder that slides out of the lever, deadbolt or padlock when a control key is turned, with no tools needed; larger doors sometimes use a large-format core with a different profile instead. A manager keeps the control key in the safe and a few spare cores on hand, so a missing key means the core is swapped in moments and repinned later. For a business with frequent staff turnover, it turns a call-out into a routine.
Do high security locks need special maintenance?
Only light care. Use the dry lubricant the locksmith recommends once or twice a year, never oil, which gathers grit around the finger pins and sidebar. Keep the keyway free of debris and insert the key fully before turning. In winter, warm a resisting key in your hand or use a de-icer rather than forcing it. Check hinge and strike screws each season so the door stays aligned. Treated this way the cylinder lasts for decades.