Sound familiar?Fonthill
- The call
- Your shop has had four employees leave in two years and each one had a key. Rekeying every time is getting old, and the hardware store will cut a copy for anyone who walks in with the original.
After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.
In plain words
Think of the upgrade as four layers working together. The cylinder resists picking, bumping and drilling. The deadbolt resists sawing and kicking with a long, hardened bolt. The strike and screws keep the frame from splitting when the door is struck. And the key control stops copies being made without your say-so. A locksmith assesses your door for each layer and tells you where it is weak, because a strong cylinder screwed into a soft frame gains you little. Most homes end up with a graded deadbolt and a patented cylinder; businesses often step up to laboratory-rated cylinders and heavier lock bodies.
High Security Locks · Fonthill
How the visit goes
Scene 1
Who holds keys and who should
For a business or a rental, the locksmith asks to see the key list, or helps you start one. Which keys exist, who carries them, which doors they open, and what happens when someone leaves. This is where the case for a patented or restricted key system becomes clear, because the system replaces guesswork with a register: every key numbered, every order authorised by a named person, and no blanks available outside the locksmith who manages it. The locksmith also asks how many people need to reach each area so the keying plan reflects the way the building actually runs.
Scene 2
Retiring the old keys and closing gaps
Part of the visit is making the old keys meaningless. Once the new cylinders are in, every previous key is tried to confirm it no longer operates anything, and any remaining door on the old keyway is either upgraded or at least rekeyed so an unknown copy has nowhere to go. The locksmith also closes small gaps found during the assessment: replacing hinge screws with long ones, adjusting a closer, adding a cylinder guard, or moving a thumb-turn away from glass. The door leaves the visit as one coherent assembly rather than one strong part among weak ones.
Scene 3
Ordering keys the right way
Extra keys are now a small procedure rather than an errand. An authorised person contacts the locksmith, the request is checked against the system record, and the key is cut from code so it works as cleanly as the first. New keys are numbered and added to the register. Businesses often issue keys against a signature and collect them when someone leaves, which the register makes simple. Homeowners typically keep two or three spare keys and hold onto the authorisation card. A key cut from a worn copy would not release the sidebar properly, which is one more reason the code route is the only route.
In the van
- Box strike
- Reinforced strike plate
- Commercial mortise lock body
- Hardened cylinder guard ring
- Graded deadbolt with hardened bolt
What shapes the quoteMaple Park Locksmith Co.
- Key control level
- A patented keyway with authorisation cards covers most homes. Geographically exclusive keyways and signature-controlled systems for businesses carry registration and administration that show in the quote.
- Commercial lock bodies
- Heavy-duty deadbolts, mortise locks, narrow-stile deadlocks and cylinder guards for storefront and warehouse doors are heavier hardware than residential deadbolts and priced as such.
- Number of doors
- Each door gets its own cylinder or lock, strike work and testing. Several doors on one keyway share the setup cost of the key system but add hardware and time per opening.
FeesSame any hour
Good questions about locks
Do high security locks need special maintenance?
Only light care. Use the dry lubricant the locksmith recommends once or twice a year, never oil, which gathers grit around the finger pins and sidebar. Keep the keyway free of debris and insert the key fully before turning. In winter, warm a resisting key in your hand or use a de-icer rather than forcing it. Check hinge and strike screws each season so the door stays aligned. Treated this way the cylinder lasts for decades.
Should I upgrade the front door only, or every door?
Start with the doors that matter and the ones that are weakest, which are often not the same. Front doors usually carry the sturdiest hardware already; the side door by the driveway, the door from the garage and the basement walkout often carry the lightest locks and get the least attention. The assessment walks the whole perimeter with you so the upgrade goes where entry is most likely, and the remaining doors can join the same key later.
How long does the installation take?
A cylinder swap with new keys on one door is a short visit. A new deadbolt, reinforced strike and frame repair takes longer, and several doors keyed to a plan take longer again, mostly in bench time pinning cylinders. The locksmith gives you a realistic estimate once the doors have been looked at, because the frame condition and the door preparation matter more than the count of locks alone.
High Security Locks
Fonthillinformation
NiagaraOntario
High Security Locks · Welland, Pelham, Crowland, Maple Park, Stop 19, Welland South, Kunda Park, Fenwick, Ridgeville
- Town
- Fonthill, Niagara
- In business
- 35 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (365) 364-0824
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 47 in 100 homes · mixed ages
- 83 in 100 homes · mostly houses
- About 47% of homes in Pelham were built in 1980 or earlier, according to the 2021 Census.Where housing ages are mixed, some homes have never had a deadbolt and others have two. The visit starts with a look at what is already there, and the recommendation might be adding a lock on one house and simply tuning it on the next.
- Single-detached houses make up about 83% of homes in Pelham (2021 Census).Detached homes are exposed to weather on every side, so exterior locks see rain, salt and freezing air directly. Choosing hardware with a good finish and a cylinder that tolerates cold, then lubricating it properly, keeps every door turning through winter.
On-site assessment
Request a visit.
After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws.
(365) 364-0824, open 24/7.